1 layer FPC with 2mil trace width and spacing from Best Technology

1 layer FPC with 2mil trace width and spacing from Best Technology

1 layer FPC with 2mil trace width and spacing, 2mil trace width and spacing is beyond most of factory capability, but Best Technology can do it.

FPC with2mil W/S, 2mil FPC , 1L FPC with 2mil .


SEND INQUIRY NOW
CONTACT US
Telephone: +86-755-2909 1601/02/03
Website: www.bstpcb.com
Phone: +86-18923412995
Send your inquiry

2mil trace width and spacing FPC is not a normal requirement, Best Technology specialize in abnormal FPC products, we have really rich experience in all kinds of special FPC manufaction. 2mil trace width and spacing FPC price will be higher than normal FPC. Because it cause the matrial waste, because the chemical liquid ethch the trace may more than 2 mil. FPC will be scrap during the FPC production. And it will need to spend more time on working on it. In order to meet 2 mil trace width and spacing, we usually requried to use 1/3 oz copper thickness, the thinner copper thickness will be helpful us to etch the trace. 2mil trace FPC one end need to add the PI stiffener on the bottom side to meet the total thickness 0.2mm, another end need to add the PI stiffener on the bottom side to meet the total thickness 0.3mm, becuase it need to assembly a ZIF connector on it. The ZIF connector thickness will be 0.2mm, 0.3mm, 0.5mm. Before we arrange shipment, we have tested every pieces of of FPC use the customer send the test tool to us without any extra cost.

Description

Specification


Product name

1 layer flex circuit board with 2 mil trace width and spacing

PCS Size

120mm*19.2mm

Base material

1mil  PI

Cu Type

1/3 oz Cu

Coverlay

1mil yellow coverlay

FPC Thickness (exclude stiffener)

0.1mm+/-0.03mm

Surface Finishing

ENIG (1u'')

Stiffener

PI


​FPC with2mil WS 2mil FPC 1L FPC with 2mil
IF YOU HAVE MORE QUESTIONS,WRITE TO US
Just tell us your requirements, we can do more than you can imagine.
Chat with Us

Send your inquiry